MEASUMAX Precision Squares

Features:
• Hardened and polished spring steel blades
• True right angle inside and outside

Specifications:

CODE
70-644
70-645
70-646
70-647

BLADE
75mm
100mm
150mm
225mm

STOCK
60x8mm
75x11mm
100x14mm
140x16mm

MEASUMAX Spring Calipers & Scribers

CODE
70-630
70-631

Name
Bent Tail Scriber
Pocket Scriber with Magnetic Tool

SIZE
190mm
150mm

TYPE
Bent Tail
Pocket

REPLACEMENT TIPS
–
70-6315

MEASUMAX Telescopic & Feeler Gauges

Features:
• Thickness range 0.03 – 1.0mm
• High grade tool steel
• Hardened tempered & polished

Specifications:

CODE
70-616
70-618

Name
Feeler Gauge Set 0.03-1.0mm
Telescopic Gauge Set 8-150mm

Range
0.03 – 1.0mm
8-150mm

MEASUMAX Threading & Radius Gauges

CODE
70-610
70-612
70-614
70-615

Name
Screw Pitch Gauge
Screw Cutting Gauge
Radius Gauge Set
Radius Gauge Set

NO.
28×55°, 24×60° Blades
4 Thread Forms
17 convex & 17 concave Blades
16convex &
16 concave Blades

RANGE
55° 4, 4.1/2, 5, 6. 7, 8, 9, 10, 11, 12, 13, 14, 16, 18,19, 20, 22, 24, 25, 26, 29, 30, 32, 36, 40, 48, 60, 62, TPI
55°, 60°, 47.5°, 14.5°
1-7mm by […]

MEASUMAX Steel Rules & Degree Protractor

Features:
• Easy to read graduations
• Metric graduations on one side and imperial graduations on the reverse side
• Rust and wear resistant for durability
• Made of hardened & tempered stainless steel with satin chrome finish
• Supplied in plastic pouch

Specifications:

CODE
SIZE
RULE GRADUATIONS
DIMENSIONS

70-601
0-180°
0-100mm
150mm

70-620
150mm/6″
1mm,0.5mm/32nds & 64ths
150x15x0.8mm

70-621
300mm/12″
1mm,0.5mm/32nds & 64ths
300x25x1mm

70-622
600mm/24″
1mm,0.5mm/32nds & 64ths
600x30x1mm

70-623
1000mm/40″
1mm,0.5mm/32nds & 64ths
1000x35x1.5mm

MEASUMAX Combination Sets

Features:
• High Accuracy 4 piece set. Open side type
• Cast iron construction and finished ground
• Engraved graduations on protractor
• Satin Chrome Rule: 12″/300mm rule (35-200), 300mm rule (35-200A)
• Foam lined plastic case with metal clips.

Specifications:

CODE
35-200
35-2005
35-200A

RULE
12″/300mm
12″/300mm
300mm

PIECES
4
4
4

MEASUMAX Bevel Protractor

Features:
• Precision bevel protractor suitable for the measurement of angles on jigs, machined components and toolmakers moulds
• Supplied with magnifying lens for easy readings of the vernier scale
• Stainless steel rule and chrome plated body
• Fine adjustment
• Comes in plastic foam lined case

Specifications:

CODE
35-201
35-2015

RANGE
0-360°
0-360°

INDEX VALUE
5′
5′

ACCURACY
±5′
±5′

MEASUMAX Digital Protractor

Features:
• Full 360° range (90° x 4)
• Easy to read LCD screen that remains upright at all times
• Aluminium frame
• Resolution:0.1°
• Hold reading function

Specifications:

CODE
35-204

RESOLUTION
0.01mm

RANGE
360°(4×90°)

MEASUMAX 11 Pce Gauge Block Set

Features:
• With high accuracy & lower surface roughness
• Excellent wring performance – High tolerance stability
• All blocks meet ISO/JIS & DIN Standards
• With round and straight chamfered on each corner of gauge blocks
• *Nata Certification not included

Specifications

CODE
37-265

NO. BLOCKS
11

GRADE
1

STD LENGTH SERIES(mm)
25,27.5,30.1,32.7,35.3,
37.9,40,42.6,45.2,47.8,50

NOTE
DIN 861

MEASUMAX 83 Pce Gauge Block Set

Features:
• With high accuracy & lower surface roughness
• Better wring performance
• High tolerance stability
• With round and straight chamfers on each corner of gauge blocks

Specifications:

CODE
37-260

NO. BLOCKS
83

GRADE
2

STD LENGTH SERIES(mm)
0.5

INCREMENT(mm)
–

PIECES
1

MEASUMAX Precision Frame Level

Description:
The Measumax Precision Machine Frame Level can be used to measure straightness and parallelism of the guide ways of various kinds of machine tools and other equipment, and to inspect the horizontal and vertical positions after the installation of equipment. The measuring surfaces are both flat and “V” and are lapped and […]

MEASUMAX Precision Machine Levels

Description:
The Measumax Precision Machine Level can be used to measure straightness and parallelism of the guide ways of various kinds of machine tools and other equipment, and to inspect the horizontal position after the installation of equipment. The measuring surfaces are both flat and “V” and are lapped and scraped for accuracy. […]

MEASUMAX Dial Bore Gauge

Features:
• Suitable for the inspection of deep internal diameters
• Moveable anvil on one side with interchangeable insert type anvils on the other side (above 35mm)
• Self aligning mechanism by centering plate
• Easy anvil replacement
• Dial face cover supplied
• Dial indicator stem 8mm
• For imperial reading or data output the 34-220 can be […]

MEASUMAX Digital Single Column Height Gauge

Features:
• Power ON/OFF
• Zero at any position
• Metric/Imperial conversion
• Carbide tipped scriber
• Large base and thick column for rigidity, lapped for flatness
• Stainless steel
• Fine adjustment carriage.
• Engage and disengage hand wheel
• Supplied in foam packing with cardboard sleeve

Specifications:

CODE
36-2105
36-2106

RANGE
0-300mm/12″
0-600mm/24″

RESOLUTION
0.01/.0005″
0.01/.0005″

ACCURACY
±0.04mm
±0.05mm

MEASUMAX Digital Caliper Gauges – External

Features:
• Digital and analogue display on LCD
• Function include Power, Absolute & Incremental
• Metric/Imperial conversion
• Remembers the data of Max. and Min. or hold data
• Direct RS232 Output (Uses cable 40-401)
• Uses CR2032 Battery. Auto Power off
• Accuracy 0.03mm
• Tolerance set

Specifications:

CODE
33-239

RANGE
0-20mm/0.0-0.8″

GRADUATIONS
0.01mm/0.0005″

MEASUMAX Digital Caliper Gauges – Internal

Features:
• Digital and analogue display on LCD
• Function include Power, Absolute & Incremental
• Metric/Imperial conversion
• Remembers the data of Max. and Min or hold data
• Direct RS232 Output (Uses cable 40-401)
• Uses CR2032 Battery. Auto power off
• Accuracy 0.03mm
• Tolerance set

Specifications:

CODE
33-244
33-245

RANGE
10-30mm/0.4-1.2″
30-50mm/1.2-2.0″

GRADUATIONS
0.01mm/0.0005″
0.01mm/0.0005″

MEASUMAX Dial Thickness Gauge

Features:
• The dial thickness gauges are used to measure the thickness of paper, leather, rubber, fabric, metal plate, glass and plastic plate etc
• Standard steel contact point and anvil ø10mm Diameter
• Compact design
• Ideally suited for quick inspection

Specifications:

CODE
34-506

RANGE
0-10mm

GRADUATION
0.01mm

MEASUMAX Dial Indicator Holders

Features:
• Accepts all MX Dial Test Indicators
• Dovetail Slide Clamp

Specifications:

CODE
38-437
38-438

SHANK DIAMETER
1/4″
1/4″

REACH
70mm
76mm

MEASUMAX Magnetic Bases

Features
• Accepts all MX Dial Indicators
• V-Base for placing on round surfaces
• On/Off lever releases magnet
• No risk of marring polished surfaces
• Mounts test indicators with 1/4″ spigot
• On/Off switch conveniently located
• One lock clamping

Specifications

CODE
38-430
38-435
38-4351
38-436

BASE SIZE
36x30x35mm
62x50x55mm
62x50x55mm
70x50x55mm

HOLDING POWER
17kg
80kg
80kg
85kg

MAIN ROD
ø20x70mm
ø12x173mm
ø16 x 200mm
ø18x150mm

SUB ROD
ø20x65mm
ø10x162mm
ø16 x 200mm
ø14x140mm

REACH
130mm
300mm
335mm
330mm

WEIGHT
0.58kg
1.50kg
1.60kg
1.7kg

MEASUMAX Dial Test Indicator – Pocket Type -1.6mm to +1.6mm

Features:
• Large measuring range – Jewel movement
• Measuring in both directions directions
• Adjustable bezel face
• Sealed Bezel to keep out dirt and coolant
• Dovetail Slide for mounting rod

Specifications:

CODE
34-218

RANGE
-1.6mm to +1.6mm

RESOLUTION
0.01mm

ACCURACY
25um

 MEASUMAX Dial Test Indicator – Economy

Features:
• The dial test indicator is ideally suited for all kinds of comparative measurements in the workshop and inspection room
• It also can be used together with machine tools, apparatus and other measuring devices – Steel ball end
• Jewel movement – measuring in both directions

Specifications:

CODE
34-217
34-2171
34-224

RANGE
0-0.8mm
0-0.03″
0-0.8mm

GRADUATIONS
0.01mm
0.0005″
0.01mm

MEASUMAX Digital Dial & Dial Test Indicators

Features:
• Manual power On/Off
• Zero setting at any position
• Metric/Imperial system conversion at any position
• With data output interface (cable 40-4061)
• Max speed 1.5m/sec
• Power 1.5V, SR44 battery

Specifications:

CODE
RANGE
RESOLUTION
ACCURACY

34-2205
12.7mm/0.5″
0.01mm/0.0005″
0.009mm

34-221
50mm/2″
0.01mm/0.0005″
0.009mm

MEASUMAX Long Range Dial Indicators

Features:
• Steel Body with black & white steel bezel
• Shock proof movement
• Jeweled movement
• Steel back with lug
• Lifting screw and revolution counter
• Supplied in wooden case

Specifications:

CODE
34-510
34-5105

RANGE
0-50mm
0-80mm

GRADUATIONS
0.01mm
0.01mm

MEASUMAX Precision Dial Indicators – Jewel Movement

Features:
• Smooth 6 jewel movement
• In-out tolerance maker
• Flat glass
• Flat back and back lug supplied
• Jeweled bearing construction, shockproof
• Individual serial numbers with corresponding calibration certificate
• Supplied in foam lined plastic case

Specifications

CODE
34-213
34-214
34-215

RANGE
0-5mm
0-10mm
0-30mm

GRADUATIONS
0.01mm
0.01mm
0.01mm

MEASUMAX Dial Indicators – Economy

Features:
• Face ø58mm – Back plate mounting lug
• Smooth movement
• In-out tolerance marker
• Supplied in foam lined plastic case with calibration certificate

Specifications

CODE
34-211
34-212

RANGE
0-10mm
0-1″

GRADUATIONS
0.01mm
0.001″

MEASUMAX Centring Dial Indicator

Features:
• Quick and accurate centering in boring and milling set-up
• Operates at any angle from horizontal to vertical.
• Internal to external by use of the 7 feeler probes supplied
• Packed in wooden box

Specifications:

CODE
34-515

RANGE
0-3mm

GRADUATIONS
0.01mm

MEASUMAX Digital Caliper – Large 600-1500mm

Features:
• Accuracy DIN862
• Large clear LCD On/Off, Metric/Imperial.Zero switches – Zero setting at any position
• Hardened S/S mechanism with patented technology
• Splash proof electronic unit, measurement tracking speed 40″/sec
• Supplied in wooden case
• 4 Way Measurement

Specifications

CODE
31-188
31-1885

SIZE
600mm/24″
1000mm/40″

GRADUATIONS
0.01mm/0.0005″
0.01mm/0.0005″

ACCURACY
±0.05
±0.15mm

LEG
125mm
150mm

STYLE
4 way
2 Way

 MEASUMAX Digital Caliper Ip54 Spalsh Proof

Features:
• Accuracy DIN862.
• Large clear LCD on/off, Metric/Imperial, Zero switches-Zero setting at any position ABS/INC
• Hardened S/S mechanism with patented technology
• Four way measurement
• Splash proof electronic unit, measurement tracking speed 40″/sec
• Supplied in fitted blow mould case

Specifications:

CODE
SIZE
GRADUATIONS
STYLE

31-180
150mm/6″
0.01mm/0.0005″
4way

31-181
200mm/8″
0.01mm/0.0005″
4way

31-182
300mm/12″
0.01mm/0.0005″
4way

MEASUMAX Digital Caliper Ip67 Coolant Proof

Features:
• New ABSOLUTE measuring system with memory hold and ABS/INC
• Fully protected against the penetration of liquids
• IP-67 prevents dust, water or oil from entering the caliper through effective encapsulation of the main parts
• Large clear screen display – Metric/Imperial conversions at any position, Zero switches at any position. The […]

MEASUMAX Gear Tooth Vernier

Features:
• One of the benefits using a caliper is that the gear does not have to be removed from the machine
• The caliper consists of two adjustable verniers, that reference two dimensions on the gear and provide a measurement
• Vertical scale: Measures the depth of the teeth from the top of the […]

MEASUMAX Vernier Calipers – Large 450-2000mm

Features:
• Clear graduations – Metric/Imperial graduations
• Mono-block design
• Long Jaw style

Specifications:

CODE
RANGE
GRADUATIONS
ACCURACY

33-197
450mm/18″
0.02mm/0.001″
±0.04mm

33-1985
600mm/24″
0.02mm/0.001″
±0.05mm

33-199
1000mm/40″
0.02mm/0.001″
±0.07mm

MEASUMAX Vernier Calipers – With Fine Adjuster

Features:
• Mono-block vernier
• With fine adjustment
• Made of stainless steel
• 4-Way measuring
• Supplied in foam lined plastic case
• Accuracy ±0.03mm

Specifications:

CODE
32-1945
32-1946
32-1947

RANGE
0-130mm/5″
0-180mm/7″
0-280mm/11″

GRADUATIONS
0.02mm/0.001″
0.02mm/0.001″
0.02mm/0.001″

ACCURACY
±0.03mm
±0.03mm
±0.05mm

MEASUMAX Vernier Caliper – Normal Screw Lock

Features:
• Metric/Imperial scale
• Mono-block vernier
• 4-Way measurement
• Made of hardened stainless steel
• Accuracy ±0.03mm

Specifications:

CODE
32-194
32-1941

RANGE
0-150mm
0-200mm/8″

GRADUATIONS
0.02mm
0.02mm/0.001″

ACCURACY
±0.03mm
±0.05mm

MEASUMAX Indicator Snap Micrometer

Features:
• Protection level IP54
• 10mm diameter carbide measuring faces
• Direct GO/NOGO judgment for mass produced parts
• Measuring force 5-10N
• Painted frame
• Carbide tipped anvils, Flatness 0.0008mm
• Indicator rang ±0.04mm
• Indicator resolution 0.001mm

Specifications:

CODE
10-132
10-133

RANGE
0-25mm
25-50mm

ACCURACY
0.001mm
0.001mm

MEASUMAX 3 Point Micrometers – Wide Range 50 -150mm, & 4-6

Features:
• Carbide-tipped contact points
• Large range capacity
• Measurements can be taken closer to the bottom of a blind bore, and can be taken in a deep hole with an extension
• Resolution: 0.01mm (metric)
• 0.0001″ (imperial)
• Supplied in deluxe foam lined aluminum case

Specifications:

CODE
25-164
25-165

RANGE
4-6″
100-150mm

ACCURACY
0.0002″
0.005mm

SETTING RING
4″
100mm

A
0.5mm
0.5mm

L
230mm
230mm

MEASUMAX Digital Bore Micrometer Set 12-20mm

Features:
• Carbide tipped contact points
• Protection level IP54 Criterion DIN40050/IEC529
• RS232 data output (Cable 40-400)
• Metric/Inch conversion
• Sets supplied with setting rings
• Supplied in deluxe foam lined aluminum case

pecifications:

CODE
25-1615

RANGE
12-20mm/0.5-0.8″

ACCURACY
0.004mm

INDIVIDUAL RANGE
12-16mm,16-20mm

SETTING RINGS
ø16mm

EXTENSION RODS
150mm

MEASUMAX 3 Point Micrometers Sets – 6mm To 100mm

Features
• Carbide tipped contact points
• Measurements can be taken closer to the bottom of a blind bore, and can be taken in a deep hole with an extension
• Supplied in deluxe foam lined aluminum case

Specifications:

CODE
25-160
25-161
25-162
25-163

RANGE
6-12mm
12-20mm
20-50mm
50-100mm

ACCURACY
0.004mm
0.004mm
0.004mm
0.005mm

INDIVIDUAL RANGE
6-8,8-10,10-12mm
12-16,16-20mm
20-25,25-30,30-40,40-50mm
50-63,62-75,75-88,87-100mm

SETTING RINGS
ø6,8,10mm
ø16mm
ø25,40mm
ø62,87mm

EXTENSION RODS
100mm
150mm
150mm
150mm

MEASUMAX Dial Bore Gauge Set 50-160mm

Features:
• Suitable for the inspection of deep internal diameters
• Moveable anvil on one side with interchangeable insert type anvils on the other side (above 35mm)
• Self aligning mechanism by centering plate
• Easy anvil replacement
• Dial face cover supplied
• Dial indicator stem 8mm
• For imperial reading or data output the 34-220 […]

MEASUMAX Depth Micrometers – Metric

Features:
• Hi accuracy interchangeable rods with hardened and micro lapped flat anvils, provide a wide measuring range
• The interchangeable rods are held securely under the top ratchet section and have individual adjustment for resetting if required
• The base is hardened, ground and lapped for accuracy
• Ratchet stop for exact repetitive readings
• […]

MEASUMAX Dial Depth Gauge 0-100mm

Features
• Equipped with a shock-proof dial indicator
• With interchangeable rods (spherical head) for wide measuring range

Specifications:

CODE
34-225

RANGE
0-100mm

DIAL RANGE
0-10mm

ACCURACY
0.012mm

RESOLUTION
0.01mm

MEASUMAX Vernier Depth Gauge

Features:
• Mono block stainless steel construction
• With screw at the back of the far end of the caliper bar
• Clear laser engrave graduations
• Supplied in plastic case

Specifications:

CODE
33-236
33-2365

RANGE
0-300mm
0-300mm

ACCURACY
±0.06mm
±0.06mm

GRADUATIONS
0.05mm
0.05mm

MEASUMAX  Caliper Jaw Type Inside Micrometer

Features:
• Micro-fine graduations on satin chrome finish
• Carbide measuring faces
• Jaws made from high grade tool steel
• Standards setting ring supplied
• Accuracy: 0.005mm

Specifications:

CODE
25-134
25-135

RANGE
5-30 mm
25-50 mm

RESOLUTION
0.01 mm
0.01 mm

MEASUMAX  Inside Micrometers Rod Type

Features:
• The anvil and the spindle are hardened and precision ground
• Spindle thread is hardened and precision ground
• Each interchangeable rod is marked with the range
• Adjustment can be made to each of the extension rods
• Resolution: 0.01mm. Accuracy: Metric(6+L/50)µm
• (L=Max.measuring length)

Specifications:

CODE
23-148
23-149

RANGE
25-50mm
50-300mm

EXTENSION RODS
2
10

MEASUMAX  Inside Micrometer – Tube Type – Small

Features:
• The combining of extension rods provide a wide measuring range
• Supplied with a standard caliper gauge foe zero setting
• Carbide measuring faces. Positive locking clamp
• Diameter of extension rods: ø15.5mm
• Accuracy: Metric ±(3+n+L/50)um. (n=number of rods L= maximum measuring length

Specifications:

CODE
25-1491
25-1495
25-150

RANGE
50-300mm
2-12″
50-500mm

HEAD
50-63mm
2-2.5″
50-63mm

RESOLUTION
0.01mm
0.001″
0.01mm

EXTENSION RODS
13,25,50(2pces), 100mm
0.5″,1″,2″(2pce),4″
13,25,50(2pce),100,200mm

MEASUMAX Inside Micrometer Tube Type – Large Metric

Features:
• The anvil and the spindle are hardened and precision ground
• Spindle thread is hardened and precision ground
• Carbide measuring faces
• Each interchangeable rod is marked with the range
• Large diameter rod for rigidity
• Resolution: 0.01mm
• Accuracy : Metric (3+n+L/50)µm (L=Max. measuring length, n=number of rods)

Specifications:

CODE
25-155

RANGE
100-1300mm

MICROMETER HEAD
100-125mm

HEAD TRAVEL
25mm

RESOLUTION
0.01mm

EXTENSION ROBS
25,50,100,200,2x400mm

ROD […]

MEASUMAX Micrometer Set 1000-1200mm

Features:
• Wide measuring range with adjustable anvil. High accuracy standard collars enable a reading that does not have to be reset when changing collars
• Standard collars: 50mm & 100mm(micrometers over 1000mm)
• Carbide measuring faces. Flatness 0.0008mm
• Pipe combined frame for light weight and high rigidity
• Resolution 0.01mm – Setting standards supplied

Specifications

CODE
20-420

RANGE
1000-1200mm

STANDARD COLLARS
50mm, […]

MEASUMAX Interchangeable Anvil Micrometer Sets To 300-1000m

Features:
• Wide measuring range with interchangeable anvils enables readings that do not have to be reset when changing anvils. Setting standards supplied
• Carbide measuring faces, Flatness 0.0008mm
• Pipe combined frame for light weight and high rigidity
• Resolution 0.01mm

Specifications:

CODE
RANGE
ACCURACY
ANVILS
STANDARD

20-340
300-400mm
0.011mm
4
2

20-350
400-500mm
0.013mm
4
2

20-360
500-600mm
0.015mm
4
2

20-370
600-700mm
0.016mm
4
2

20-380
700-800mm
0.018mm
4
2

20-390
800-900mm
0.020mm
4
2

20-391
900-1000mm
0.020mm
4
2

MEASUMAX Interchangeable Anvil Micrometer Sets To 300mm

Features:
• Baked enamel blue cast frame – Resolution 0.01mm
• Interchangeable anvils fitted with adjusting collar to set the overall measurement
• Carbide measuring faces, Flatness 0.0008mm
• Micro-fine clear graduations on satin chrome finish
• Ratchet thimble for exact repetitive readings
• Setting standards supplied and adjustment available on all extension rods

Specifications:

CODE
20-120
20-123

RANGE
100-200mm
200-300mm

ACCURACY
0.007mm
0.009mm

ANVILS
4
4

STANDARD
4
4

MEASUMAX Micrometer Sets – Imperial

Features:
• Vernier scales graduations
• Carbide tipped anvils. Flatness 0.0008mm
• Micro-fine clear graduations on satin chrome finish
• Deluxe blow mould case (20-116)
• Deluxe foam lined aluminum case (20-117)
• Painted cast frame
• Resolution:0.0001″
• Supplied with setting standards

Specifications:

CODE
20-116
20-117

RANGE
0-4″
0-6″

ACCURACY
0.0001″
0.0001″

QTY IN SET
4pce
6pce

MEASUMAX Micrometer Sets – Metric

Features:
• Easy adjustment for recalibrating with ratchet spanner
• Carbide tipped anvils, Flatness 0.0008mm
• Micro-fine clear graduations on satin chrome finish
• Painted cast frame
• Resolution:0.01mm

Specifications:

CODE
20-111
20-114
20-115
20-118

RANGE
0-75mm
0-100mm
0-150mm
150-300mm

ACCURACY
0.01mm
0.01mm
0.01mm
0.01mm

QTY IN SET
3pce
4pce
6pce
6pce

MEASUMAX Micrometer Outside-metric

Features
• Carbide measuring faces – Painted cast frame
• Micro-fine clear graduations on satin chrome finish
• Measuring face 6.5mm, Flatness 0.0008mm
• Ratchet stop for exact repetitive readings
• Includes deluxe foam lined plastic case and wrench
• Resolution 0.01mm
• Supplied with setting standards

CODE
10-102
10-105
10-107
10-110

RANGE
0-25mm
25-50mm
50-75mm
75-100mm

ACCURACY
0.004mm
0.004mm
0.005mm
0.005mm

MEASUMAX Micrometer Outside- Imperial

Features:
• Carbide measuring faces
• Measuring face 6.5mm, Flatness 0.0008mm
• Micro-fine clear graduations on satin chrome finish
• Ratchet stop for exact repetitive readings
• Includes deluxe foam lined plastic case and wrench
• Resolution 0.0001″ – Vernier scale
• Painted cast frame
• Supplied with setting standards

CODE
10-101
10-103
10-106

RANGE
0-1″
1-2″
2-3″

ACCURACY
0.004mm
0.004mm
0.005mm

MEASUMAX Outside Micrometers 100-300mm

Features:
• Carbide measuring faces – Painted cast frame
• Micro-fine clear graduations on satin chrome finish
• Measuring face 6.5mm, Flatness 0.0008mm
• Ratchet stop for exact repetitive readings
• Includes deluxe foam lined plastic case and wrench
• Resolution 0.01mm
• Supplied with setting standards

Specifications:

CODE
RANGE
ACCURACY

12-315
100-125mm
0.006mm

12-316
125-150mm
0.006mm

12-317
150-175mm
0.007mm

Digital Outside Mic. 0-25mm/0-1″

Features:
• Large LCD for easy reading
• Metric-imperial conversion and zero setting keys
• Friction thimble for easy one hand use
• Painted frame. Carbide measuring faces
• Resolution:0.001mm/0.0005″

Specifications:

CODE
RANGE
ACCURACY
RESOLUTION

10-124
0-25mm/0-1″
±0.002mm
0.001mm/0.0005″

MEASUMAX Digital 4 Way Outside Micrometer

Features:
• Protected to IP54 specifications
• 2 large LCDs for easy reading R/H or L/H
• Displays can be changed to read in any direction
• Metric-imperial conversion and zero setting keys
• Direct RS-232 output (uses cable 40-400)
• Friction thimble for easy one hand use
• Chrome plated frame. Carbide measuring faces
• Resolution: 0.001mm/0.0005″
• […]

MEASUMAX Digital Micrometer IP65

Features:
• Protected to IP65 specifications
• Large LCD for easy reading
• Metric conversion and zero setting keys
• Carbide measuring faces, Flatness 0.0008mm
• Abs, and inc. conversion. Power Origin Auto off
• Origin data set
• Ratchet thimble
• Chrome-plated frame
• Screen Resolution: 0.001mm/0.0005″
• 3V CR2032 Lithium Battery for long battery life

Specifications:

CODE
10-1245

RANGE
0-25mm/0-1″

ACCURACY
±0.001mm

SPINDLE RESOLUTION
0.01mm

SCREEN RESOLUTION
0.001mm/0.0005″

MEASUMAX Screw Thread Micrometers

Features:
• V-shaped and cone-shaped anvils (interchangeable) are supplied. Dimensions of anvil-tail: ø5x15mm
• Ratchet friction thimble
• Painted frame, rotating spindle
• Resolution: 0.01mm/0.0001″

Specifications:

CODE
RANGE
ACCURACY
Supplied with Anvils

10-138
0-25mm
±0.004mm
F0101-F0105(60º)

10-139
25-50mm
±0.004mm
F0102-F0106(60º)

10-1391
50-75mm
±0.004mm
F0102-F0106(60º)

MEASUMAX Micrometer Head- Friction Spindle 0-25mm

Features:  Friction thimble for easy one hand use

Resolution: 0.01mm

CODE
11-470

RANGE
0-25mm

ACCURACY
0.002mm

MOUNTING SHOULDER
12×17.5mm

O/A LENGTH
113mm

MEASUMAX Digital Moisture Meter

Description: Application: suitable to measure the moisture content in wood fiber materials, wooden articles, tobacco, cotton paper, building, soil and other fibre materials

Model:  50-7806

Features

Measurement range:  moisture content 0-50%
Temperature  –10-6ºC
Resolution:  0.1
Accuracy: Moisture:  ±(0.5%n+0.1), TEMP: ±0.8℃
Calibration:  Automatic
Power supply:  4×1.5V AA (UM-3) battery
Dimensions:  182 x 68 x 38mm
[…]

MEASUMAX Digital Hardness Tester         

Model:     50-5201

Weight:    0.10 KG

Dimensions:      15 x 8.5 x 4

MEASUMAX Refractometer 0-18 Brix

An industrial fluids testing device that will quickly and accurately measure the concentrate to water ratio of metal Working coolants, parts cleaners, chromating solutions and many other types of aqueous based solutions and emulsions.

Model:              70-670

Capacity:          0-18 Brix

Weight:            […]