Project Description

WYLER Precision Spirit Levels, Clinometers and Cross Spirit Levels have been known for decades all around the globe for their high precision, quality and reliability. All products are manufactured according to the relevant international standards and assure an extraordinary resistance against wear and geometrical deformation due to the use of selected and well matured materials.

Precision Spirit Level

Click on the image for details

Magnetic Spirit Level 48 “SPIRIT” 

  • The MAGNETIC SPIRIT LEVEL 48 SPIRIT is a universal spirit level, particularly suitable for measurements on vertical and horizontal surfaces and shafts
  • The magnetic inserts in the vertical measuring base assure an excellent adhesion to vertical shafts and surfaces
ww48
Precision frame Spirit Level 58 “SPIRIT”

  • The FRAME SPIRIT LEVEL 58 SPIRIT is suitable for measurements on vertical and horizontal surfaces and shafts
  • Optional magnetic inserts in the vertical measuring base assure an excellent adhesion to vertical shafts and surfaces
58d
Präzisions- Rahmenwasserwaage 581 / 582

  • Model 581
    with four base surfaces of special width, for checking shafts up to diameters of 200mm,Size150x150x50mm
  • Model 582
    with two base surfaces of special width, for checking shafts up to diameters of 500mm, Size 200x200x120mm

Dimensions and sensitivities on demand

ww582
Horizontal Spirit Level 55 “SPIRIT”

  • The HORIZONTAL SPIRIT LEVEL 55 SPIRIT is suitable for measurements on horizontal surfaces and shafts
  • Optional magnetic inserts assure an excellent adhesion to shafts and surfaces
55
Inspection Spirit Level 61 

  • The INSPECTION SPIRIT LEVEL 61 is suitable for measurements on horizontal surfaces and shafts
  • Optional magnetic inserts in the measuring base assure an excellent adhesion to shafts and surfaces
61
Crankpin Spirit Level 56 

  • The CRANKPIN SPIRIT LEVEL 56 is particularly designed for measurements on pins of crank shafts
  • Optional magnetic inserts in the longer measuring base assure an excellent adhesion to shafts and surfaces
56
Adjustable Micrometer Spirit Level 68 

  • The ADJUSTABLE MICROMETER SPIRIT LEVEL 68 is suitable for measuring inclinations from -4 … +20 mm/m
    • Measuring range:
      • 1 division on the micrometer drum is 0.02 mm/m
      • 1 full turn of the drum with
      • 100 divisions = 2 mm /m
    • Number of turns:
      • down 2 (equivalent to 2 x 2 mm/m = 4 mm/m)
      • up 10 (equivalent to 10 x 2 mm/m = 20 mm/m)
      • measuring range in one position -4 … +20 mm/m
68heh
Micrometric Spirit Level 53 

  • Due to the built in lay-on shaft and to the small contact face of the measuring spindle, the MICROMETRIC SPIRIT LEVEL 53 is particularly suitable for measuring inclinations over a distance of 100 mm, without disturbance of the measuring result by irregularities of the surface between the measuring points
  • The MICROMETRIC SPIRIT LEVEL 53 is also suitable for measuring the depth of cavities
  • Measuring range:
    • metric version ± 5 mm on a distance of 100 mm
    • Inch version ± 2/10 inch on a distance of 100 mm (~ 4 inch)
53heh
Adjustable Spirit Level 52 

  • The ADJUSTABLE SPIRIT LEVEL 52 is a suitable option when the measuring object (flat surface or shaft) can not be positioned in the true horizontal and therefore the measuring range of a standard precision spirit level is not sufficient
  • The ADJUSTABLE SPIRIT LEVEL 52 covers measurements on „sloping“ surfaces and shafts up to an inclination of 50 mm/m
52
Magnetic Angle Spirit Level 47 

  • The MAGNETIC ANGLE SPIRIT LEVEL 47 is suitable for measurements on vertical surfaces and shafts
  • The magnetic inserts assure an excellent adhesion to vertical shafts and surfaces
47heh
Universal Angle Spirit Level 64 

  • The UNIVERSAL ANGLE SPIRIT LEVEL 64 is particularly suitable for measurements on vertical surfaces and shafts
  • The tubular level can, however, also be used for measuring on flat surfaces
64
Shaft Spirit Level 63 

  • The SHAFT SPIRIT LEVEL 63 is suitable for measurements on horizontal surfaces and shafts and, due to the side windows, it is particularly designed for measuring objects in a higher position where the reading from the side is necessary
  • Optional magnetic inserts in the measuring base assure an excellent adhesion to shafts and surfaces
63heh
Horizontal Spirit Level 69 

The HORIZONTAL SPIRIT LEVEL 69 is particularly suitable for measurements on flat surfaces and shafts (when equipped with prismatic base) on machines, apparatus, etc.

69heh
Tubular Spirit Level 59 

The TUBULAR SPIRIT LEVEL 59 is particularly suitable for measurements on flat surfaces of machines, apparatus, etc. as well as for permanent mounting on measuring objects

59heh
Screw-on Spirit Level 66 

The SCREW-ON SPIRIT LEVEL 66 is specially designed for measurements on flat surfaces of machines, apparatus, etc. as well as for permanent mounting on measuring objects

66heh
Cross Spirit Level 78 

  • The CROSS SPIRIT LEVEL 78 is specially designed for the simultaneous measuring or levelling of surfaces on machines, apparatus, etc.
  • The main advantage of this spirit level is, that the inclination of both axis (X- and Y-axis) is visualised at the same time. This enables a quick levelling of a measuring object in a very easy way
78heh
Cross Spirit Level 76 

The CROSS SPIRIT LEVEL 76 is specially designed for the simultaneous measuring or levelling of surfaces on machines, apparatus, etc. The main advantage of this spirit level is, that the inclination of both axis (X- and Y-axis) is visualised at the same time. This enables a quick levelling of a measuring object in a very easy way

76heh
Communicating Water Level 77 

  • The Communicating Water Level 77 is based on the law of communicating pipes and is particularly suitable for measuring the difference in heights of 2 or more distant points, which are not in direct connection to each other
  • The pin of the micrometer feeler needle is approached to the water surface. Due to the surface tension of the water the liquid will „jump“ to the needle at the moment the pin touches the surface. Thanks to the window slots at the side, the moment of the surface disturbance is very well detectable
77heh

 

Clinometer

Click on the image for details

Clinometer 80 

  • The CLINOMETER 80 is particularly suitable for precisely measuring angular deviation in any inclination on flat surfaces and shafts (with prismatic base only). Measuring range ± 180 degrees
  • The Clinometer 80 allows in an easy way all sorts of inclination measurements with a reading of 1 Arcmin. A guess at approx. 0.5 Arcmin is possible for the experienced user
  • For a rough setting, the micrometer drum can be disengaged by pressing it with the thumb in direction of the arrow. A coarse setting is then made by rotating the vial by hand. Reengage the drive and rotate the micrometer drum to obtain the final setting
  • Optional magnetic inserts in the measuring base assure an excellent adhesion to shafts and surfaces in any position
Clinometer80
Frame Angle Spirit Level 79

  • The FRAME ANGLE SPIRIT LEVEL 79 is suitable for precise measurements on flat surfaces and shafts (with prismatic base only). Measuring range ± 180 degrees
  • Due to the easy fine adjusting system of any angle in the range of ± 180 degrees the main vial can easily be read. The vernier allows a reading at 3 Arcmin. The main vial has (in the standard version) a sensitivity of 0.30 mm/m, indicating a deviation of 1 Arcmin when the bubble moves by one division. The main vial is placed in a well protected but nevertheless easily readable position
  • Optionally the FRAME ANGLE SPIRIT LEVEL 79 is available with reading in artillery permils
79heh
Inclination Spirit Level 57

  • The INCLINATION SPIRIT LEVEL 57 is suitable for precise measurements on flat surfaces and shafts up to 90 degrees
  • Due to the easy fine adjusting system at any angle up to 90 degrees the main vial can easily be adjusted and – using the vernier – the inclination angle can be read precisely to 1/6 degrees (10 Arcmin). The main vial has a sensitivity of 0.30 mm/m (= 1 Arcmin) thus enabling precise measurements with a high reliability
  • The Inclination Spirit Level 57 can also be used for standard measurements and adjustments in the same manner as any standard spirit level
  • Optional magnetic inserts in the measuring base assure an excellent adhesion to shafts and surfaces in any position
57heh
Clinorapid 45

  • The CLINORAPID 45 is suitable for measuring any inclination in degrees and minutes, on flat surfaces and shafts.
    Measuring range ± 180 degrees
  • As this instrument does not measure using a glass vial, it is nearly independent from the environmental temperature and
    can therefore very well be used for outdoor measurements
  • As soon as the pendulum disc supported by ball bearings and equipped with magnetic damping is released, it aligns to the gravity. The inclination can be read on the large circular scale (± 180 degrees) against a 10 Arcmin vernier. The reading is retained until next release
  • The Clinorapid 45 enables measurements in very bad visibility and under aggravated conditions
  • Optional magnetic inserts in the measuring base assure an excellent adhesion to shafts and surfaces in any position
45heh
Protractor spirit level 62 

  • The PROTRACTOR SPIRIT LEVEL 62 is suitable for measuring angular deviation in any inclination on flat surfaces and shafts. Measuring range ± 180 degrees. This simple and handy inclination measuring device finds various applications, particularly in the machine tool industry as well as in the building and installation business
  • The Protractor Spirit Level 62 provides the following special advanteages:
    • Thanks to the prismatic measuring base this instrument enables not only measurements on flat surfaces, but also on cylindrical objects like shafts, pins, tubes, etc.
    • The transversal vial assures correct positioning to avoid rollover errors
    • Easy applications due to turning vial body and index
    • The full circle scale of 2 x 180 degrees enables exact measurements on flat surfaces and shafts in any inclination
  • Optional magnetic inserts in the measuring base assure an excellent adhesion to shafts and surfaces in any position
62heh

 

Cross Spirit Levels and Circular Spirit Levels

Click on the image for details

Cross Spirit Level 76

The CROSS SPIRIT LEVEL 76 is specially designed for the simultaneous measuring or levelling of surfaces on machines, apparatus, etc. The main advantage of this spirit level is, that the inclination of both axis (X- and Y-axis) is visualised at the same time. This enables a quick levelling of a measuring object in a very easy way

76heh
Circular Spirit Levels 72

CIRCULAR SPIRIT LEVELS are suitable for erection and levelling of machines or apparatus

72heh
Circular Spirit Levels 73

CIRCULAR SPIRIT LEVELS are suitable for erection and levelling of machines or apparatus

73heh
Circular Spirit Levels 74

CIRCULAR SPIRIT LEVELS are suitable for erection and levelling of machines or apparatus

74heh